Wadsn DBAL-A2 Flashlight With Red and Infra Red Laser - Tan
The WADSN DBAL-A2 Flashlight with Red, and IR Laser is a great combination of flashlight and lasers for using on your weapon for a wide range of operations.
The body is made from sturdy, durable polymer and can be mounted to any rail system using its mounting located on the bottom. The polymer keeps this accessory at a low weight, so as not to unbalance your rifle when attached.
You can power this accessory using either a CR123a or 16340 battery.
At the front of the DBAL-A2 is where the flashlight and lasers are housed in their own housings. They both have protective covers which are retained with rubber straps.
At the rear is where the switch for changing between the modes is as well as the constant on/off switch and the attachment point for the pressure switch. The constant on/off switch is located on the left side of the rear and when pressed will turn the DBAL-A2 on, in whatever mode you have it set to until you press the switch again.
On the right-hand side of the rear is where the connection for the pressure switch is. The pressure switch will only activate the DBAL-A2 for as long as you are pressing down on the switch.
In the centre rear is the switch for swapping between off, light, light with red laser, light with IR laser, and IR laser modes. This gives you a wide range of modes to choose from.
Features:
- Model : WD06001
- Emitter Type : CREE XP-R2
- Battery Type : 1no 16340 (3.7v) or 1no CR123 3v (neither supplied)
- Runtime : Low Power approx 4 hours, High Power approx 1 hour
- Maximum Range : 100m
- Colour : Dark Earth
- Torch Outpout : Low Power 42 Lumens, High Power 160 Lumens
- Weight 128grams
Recommendations:
